1.The Aokai® Gas Fireplace Temperature Sensor Thermocouple Introduction
Turn on the gas and push your valve 5-10s till the thermocouple end is heated.
Release your hand and it work well. If failed, please check
2.Product Parameter (Specification) of the Gas Fireplace Temperature Sensor Thermocouple
Technical parameters
Name
High quality gas fireplace temperature sensor thermocouple
Model
PTE-S38-1
Type
Thermocouple
Material
Cooper(thermocouple head:80%Ni,20%Cr)
Cable-Silicone, Cooper, Teflon
Gas source
NG/LPG
Voltage
Potential Voltage:≥30mv.Work with the electromagnetic valve:≥12mv
Fixing method
Screwed or Stucked
Thermocouple length
Customized
3.Product Qualification of the Gas Fireplace Temperature Sensor Thermocouple
Company with ISO9001:2008, CE,CSA certification
All material with ROHS and Reach standard
4. Product Feature And Application
Fix the thermocouple nut M8 on the valve end tightly (Check if your valve end thread is 8mm before your buying)
Connect two flat terminals well with the current tilt switch terminals.
Gas Fireplace Temperature Sensor Thermocouple
Install the thermocouple tip on a board and use two nuts to fix its location
Keep the tip about 5mm from the burner hole.
Gas Fireplace Temperature Sensor Thermocouple
WIDE APPLICATION --- Fireplace heater universal gas thermocoupler used for gas fireplace, fire pit, grill, stove, catering cooker, patio heaters etc.
5.FAQ
Q:Can you provide samples ?
A:Of course,we can offer you samples for free(less than three),and you just pay freight.
