Gas Indoor Vented Gas Heater Solenoid Valve

1.The Aokai® Gas Indoor Vented Gas Heater Solenoid Valve Introduction

The spool or poppet of the valve is connected to a ferrous metal plunger, which is typically spring centered or spring offset. The plunger slides within a core tube of non-ferrous metal, which itself is surrounded by a coil of electrical windings.

2.Product Parameter (Specification) of Gas Indoor Vented Gas Heater Solenoid Valve

Technology data

Opening current ≤70mA-180mA also can according to request of customers

Closing current ≥ 15mA-60mA also can according to request of customers

Inner resistance(20°C) 20mΩ±10%

Spring pressure 2.6N±10%

Ambient temprature -10°C - 80°C

3. Product Qualification of Gas Indoor Vented Gas Heater Solenoid Valve

Company with ISO9001:2008, CE,CSA certification

All material with ROHS and Reach standard

4.Product Feature And Application

The most basic solenoid valves are two-way, two-position poppet valves, which simply open and close to allow flow when their coil is energized. They are available as “normally-open” and “normally-closed” versions, which means normally-flowing and normally-blocked, respectively. Normally-open in fluid power is the opposite of normally-open in electronics, which means the switch or contact is open and not flowing electrons.

The Aokai®Gas Indoor Vented Gas Heater Solenoid Valve

solenoid valves consist of a machined spool that can slide within a machined valve body. Each end of the spool can have a plunger attached, allowing the solenoid valve to be pushed in either direction, allowing three positional envelopes.

5.FAQ

how can we guarantee quality?

Always a pre-production sample before mass production;

Always final Inspection before shipment;